Tension is a crucial part of sewing because it affects how the fabric will behave while being sewn. Too much tension and the fabric will bunch up as you sew, causing sewing problems, and too little tension will cause puckering on your seams.
Sometimes, the tension on your sewing machine can get too high. If you want to keep your machine running smoothly and avoid a malfunction, you must learn to increase tension on the Brother sewing machine. While this might seem easy enough to do at first glance, there are some tricks to doing so quickly and effectively.
This article will show you how to increase tension adjustments on the Brother sewing machine.
Here’s How to increase tension on Brother sewing machine properly:
- Place your thread on the spool pin, then turn the wheel until the thread is on the tension discs.
- grab hold of your thread and pull it down toward your work area.
- Keep pulling it down until you reach the tension release lever, then pull it open.
- Pull harder on your thread until you see that it is being drawn up into the bobbin case area.
- Once all the thread is pulled upward, let go of it. The tension disks should then close and create a higher tension on your sewing machine.
- Now, turn the wheel to allow the thread to get pulled back down again.
- Pull less on your thread this time so that only a small amount gets drawn upwards into the bobbin area again. After this has been done, you’ll want to close the tension release lever to lock your Brother sewing machine’s tension at the new level.
- Now, turn your wheel again to allow the thread to get pulled down into the bobbin area.
- After this is done, you’ll want to test the sewing machine’s tension by holding onto it and running it back and forth a few times.
- If you feel it’s too tight or too loose, adjust it using the same techniques that you just used to increase tension on the Brother sewing machine and do it again before continuing with your sewing plans for that day.
The above techniques are good to remember when you’re trying to increase tension on your brother’s sewing machine.
Most Common Brother Sewing Machine Tension Problems with Their Solutions:
1. Sewing machine tension too tight:
This is usually caused by the bobbin winding mechanism getting stuck. For example, if you’re having trouble getting your machine to wind new thread onto the pulley, this problem is likely the culprit. Go ahead and try unplugging it, then repairing or removing it.
2. Sewing machine tension too loose:
This type of issue can result from broken or badly installed tension discs. The discs are what hold the thread in place. If they’re broken or improperly installed, this problem is likely to occur. Be sure that the tension discs are causing the problem before you remove them, though.
3. Brake problem:
This is usually caused by an improperly adjusted brake lever.
4. Bobbin winding problems:
Sometimes, the bobbin can get tangled up with the thread and work its way into the mechanism, while other times, it might come off when you’re sewing. This can make sewing seem to become stuck due to having to stop frequently to rethread your machine.
5. Handwheel problems:
The handwheel is where you run the tension test to make sure everything is working properly.
6. Feed dog problems:
Feed dogs are what grab the fabric and move it along. If you notice that your machine is having trouble moving your fabric, then this is likely a problem that you need to work on fixing.
7. Presser foot problems:
If your presser foot isn’t properly set, it’s not going to be able to hold the fabric in place while you’re working on it.
8. Needle issues:
Broken needles are the most common type of needle problem, but they’re not the only ones. Other issues include needle jams and bent needles.
9. Thread tension issues:
If your thread doesn’t seem to be working properly, this is likely the problem you’re facing with your machine. There can be many reasons why thread tension might be an issue, including broken or jammed thread spools, improperly wound bobbins, or other similar problems.
10. Presser foot issues:
A variety of issues can arise here, including damage to the foot or improper presser plate height.
The above information can help you find some solutions to these problems to get your Brother sewing machine back up and running in no time.
Conclusion:
The Brother sewing machine is one of the most widely used computerized or mechanical sewing machines for domestic purposes, with various features and stitches. It is also used for commercial purposes. Over the years, Brother Company has introduced many models, and this beginner’s guide article will help you find out the best brother sewing machine according to your need.
