Sewing fur with a machine can be challenging and time-consuming, and some sewing machines can’t cut through fur because they don’t have enough power. While going through the process, you may face many issues; for example, tiny fur hairs can get stuck in a sewing machine and cause the patterns to move around.
We are here with 5 easy tips to make this whole sewing process easy for you. First time sewing fur? Need not worry! You’ll learn how to sew fur on a machine if you keep reading.
6 Tips To Follow When Sewing Fur with A Sewing Machine
Making fur is easier for steady and calm people because it needs patience and perseverance. People often end up throwing their fabric in the bin due to negligence. Here are 6 mistakes you can avoid to sew fur on a sewing machine seamlessly.
Opt For A Standard Sewing Machine
Many people mistake using a regular sewing machine when sewing fur. It is not advisable to use a traditional sewing machine as the fur can be damaged in any work that requires specific machine requirements. If you have the right tools, building materials, and skills, you can start sewing with your sewing machine the right way.
Use a Rotary Cutter or Shears
It is terrible to cut the pelts with fabric scissors because you could cut some hair. Instead, use a rotary cutter or shears to cut the sides of the pelts instead of cutting them past.
While using a rotary cutter or shears can cut the pelts, you must be careful. If you cut some or all of the pelt skins to make the edges flat, it will be easier to sew together. Fur will be easier to sync because of this.
Use Sewing Pins
Binder clips are a very personal way of holding pelts because they do not make holes in the skin. Make sure the furs do not touch in any way.
Binding clips may cover fur hides to about half an inch. This piece of leather should be on the leather side of the pelts, not on the fur side.
Cut your pelts appropriately
Before sewing, make sure the pelts are even and cut to the correct length. You can look at them better if they have their hair upside down. How you assemble pelts is up to you. You can find out which ones work best by looking at the edges of objects.
The skins should be upside down, and the fur should look down when you arrange them the way you want. Next, fold the pelts to make the edges even.
You have to be a little careful when you sew fur pelts together. Follow these steps to learn how to sew fur pelts.
Use A Regular Needle
Fur needles have a curved tip that helps them pierce the skin faster than other needles. Once the sewing machine is off, remove the old needle and keep it in place.
First, remove the old needle. In this way, the screw can be easily accessed. You can do this by inserting a blunt needle into your sewing machine. Make sure the edge of the needle is facing the back of the machine. Once that is done, tighten the screw so that the needle stays in place.
Use Regular Thread
You may want to use a stronger fiber than the overall target for best results instead. To keep the pelts together, use a strong cord made of leather or denim to keep them tight. After that, you can sew the sewing machine in the same way.
Sewing fur requires a particular sewing machine to make it do it very quickly, but standard sewing machines can’t do it. The sewing machine can make many furry things with simple tips, and tricks. Once you become capable of sewing fur, you may want to make different clothes and sell them in the market. Export of fur apparel is essential for a country’s economy; therefore, you may get a chance to be a small part of it.