Despite the technological boom which has spared no industry in the whole wide world, the sewing industry has grabbed a nice share taking the ultimate benefit of the technology.
This has really eased the worries where computerized sewing machines will literally take no effort from you — from selecting the intensified design which seems impossible to amend on the fabric until and unless you have spent decades operating the sewing machines.
Now even the beginners can take charge of the latest sewing machines but there are still the sewers who delight in using the old manual sewing machines even though they do perceive taking a risk by trusting in their experience.
For them, we have a vintage-alike sewing machine still in demand, and that comes from Sears, the renowned name in the sewing machines industry!
But the question remains as to how to use a Kenmore sewing machine that is purely a manual one. Worry not, you will be able to use this sewing machine just like a real pro!
What to Look for Before Using Kenmore Sewing Machine
- Get yourself ready to face the ultimate and overall manual sewing machine
- However, Kenmore is an electric-operated machine attached to the foot pedal. requiring you to practice controlling the speed variation (yes, the full push takes the speed to the higher mark.)
- Know how things work, specifically with the manual sewing machine which we will elaborate with good details — from installing the needle to threading it to winding up the bobbin to the correct size of needle to every single thing
- If not confident in operating the manual sewing machine as if it is your first time, try sewing the piece of fabric to test and get used to operating it
How to Use a Kenmore Sewing Machine
Almost all the Kenmore sewing machines work the same as we project the whole process within this effective guide.
Step #1: Power Up the Kenmore Sewing Machine
- Ensure you got an AC power outlet having the support of 110V/120V
- Double-check if the machine’s switch is off
- Get a three-prong outlet to connect with the machine plug and then insert that into the main power outlet
- Turn the outlet on, and then turn the machine’s switch to get the current rolling
Step #2: Playing Up with the Presser Foot Pressure
It is vital to attain the correct foot pressure to make sure the fabric is sewn with strong seams.
- Open up the race cover plate to find the pressure control dial
- Now, adjust the dial accordingly to what fabric you got to sew, however, the most sewing projects would normally go with 3 until and unless it is advised otherwise
Step #3: Needle Time
We expect your Kenmore sewing machine to be utterly new and just came out of the box.
And while setting up, the important part of the sewing is always, of course, going to be the needle.
So, let’s get learned about changing/setting up the needle to the Kenmore sewing machine.
- Get the needle clamp screws to loosen (but do not unwind completely at all)
- Make sure the needle you are about to use is suitable not just for your fabric but with the Kenmore sewing machine
- Insert the needle and jack it up a bit to the point it does not go upward any further
- Tighten up the needle clamp screw using a screwdriver and ensure it does not move and come loose
Step #4: Removing and Winding the Bobbin
Before you officially start with the sewing project, you have to wind the bobbin first.
- Remove the bobbin by sliding the hook cover plate and take out the bobbin by releasing the button placed on the right side
- And to wind the bobbin, you first disengage the machine’s clutch by pulling the knob away
- Get the thread out of the spool and set it up on the thread guide through the bobbin winder
- Glide the thread through the bobbin hole
- Hang the bobbin onto the winding spindle while pushing it slightly towards the right to get it placed securely
- Start the machine by pressing the foot control while holding the thread’s end
- See if the bobbin is almost full after winding it up and then cut the thread
- Unhook the bobbin by moving the spindle to the left side, and re-engage the clutch back to the sewing machine
Step #5: Threading the Needle
It is quite easy to thread the needle if you follow how to thread the needle out of the Kenmore sewing machine.
- Set the spool of thread over the spool pin
- Take the thread from its edge and wrap it around the thread guide from the left, then take it through the thread slot and the thread take-up lever up to the needle area
- Pierce the needle through the thread guide just above the needle, and get the needle threaded manually by taking it through the needle eye
- Make sure to leave the thread to loosen up to 3 to 4 inches to get it aligned with the thread coming from the bobbin
Step #6: Get Along with Thread Tension
- Whether you want the thread tension to tighten or loosen enough, get the control knob to set at the higher number or the lower for vice versa. By setting the thread tension at the loose side which will get the top thread to go underneath the fabric. Whereas, adjusting the tension to be tightened enough will get the thread from the bobbin to show at the top side of the fabric
Step #7: Select your Prefered Stitch Style
Even though Kenmore is a total manual sewing machine, the convenience of selecting the pre-set stitch style is the next-level thing for the new and pro sewers!
- Get the to stitch selecting control knob to set on your preferred stitch style
- Once you set it on, now adjust the wide and the length dials to fine-tune the setting to meet your specific sewing requirements
Conclusion!
Luckily, there is no complex procedure that can send you on the backfoot with how to use a Kenmore sewing machine despite it being manually operated.
This literally works even in the modern time showing exactly your skill level of sewing using the manual machines.
So, we do not expect to hear anything that will stop you from using the manual Kenmore sewing machines from now on! 🙂
