Learning how to operate a Janome sewing is quite an easy task with only three to four basic steps. Once you set up your sewing machine equipment the right way, you can get to the sewing part in no time. Most people simply make use of the user manual to learn about the basic setup, in this article we will simplify the steps from the manual guide for you.
Once you learn the basics of operating and using a Janome sewing machine you can continue using it for a long time if you keep up good maintenance. Oiling and cleaning your Janome machine is important at daily intervals as it ensures the smooth running of the machine. Take a look at the following steps on using a Janome sewing machine:
Table of Contents
1: Begin by Setting Up Your Sewing Machine
The best way to appropriately set up your Janome sewing machine is to refer to the manual guide at first. Certain models have different procedures for set up so it’s better to do it the correct way through the manual guide.
Since Janome sewing machines are electrical it’s best to be safe and turn off the main switch before connecting to a power source. Once you insert the plug into the main socket, you can then turn on the machine from its switch. Make sure to place your foot pedal at a comfortable and appropriate place as you’ll be operating through the main pedal throughout. The sewing speed is based on how hard you press the pedal.
The reverse stitch lever is for when you need to make stitches backwards. For the normal front stitching, you’d need to operate via the dog feed lever. The dog feed lever needs to be towards the backside of the machine to make it sew smoothly. Once you want to start sewing the dog lever must be raised at the top, once you do this turn the handwheel towards yourself and the sewing machine will get going. Make sure to keep a steady pace from the foot pedal for consistent stitches from your Janome sewing machine.
2: Picking a Stitch Pattern, its Lenght and Width
In order to make changes and adjust your stitch pattern, you must first raise your needlepoint as high as you can. Below the needlepoint area, you will find the dial selector that will help you make adjustments to the stitch pattern. Be careful and keep your fabric away from the dial selector as it may let the needle get stuck to the fabric, leading to damage.
What makes Janome sewing machines different from most other sewing machines is the SS setting for stretch stitch patterns. The stitch length dial and the width dial can both be adjusted to make changes to the size of the stitch according to your needs.
3: Altering the Thread Tension
Every Janome sewing machine has its own tension dial that can easily be adjusted to the needs of the fabric we’re sewing. To make sure you have the right balance on the threads make sure to check whether the stitch is straight or not. The needle showing a little bit under the fabric is also a good indicator of a balanced thread stitch. As long as your stitches aren’t going in a haphazard and zigzag manner you need not worry about the thread tension.
Summary of Operating a Janome Sewing Machine
In order to place your fabric under the needlepoint, first lift up your foot from the pedal underneath. Gently let go of your grasp as you go about each stitch, you’ll get the hang of it in time. The needle must be lowered at the same pace as you tap the foot pedal.
You can make a few reverse stitches, in the beginning, to smoothen out the rest of the stitches and get your work done faster. You must keep the handwheel in the direction of your stitches, if you wish to make stitches in a different direction you must first stop the machine and then move the fabric in the direction you wish. While the needle will stay in the fabric you must lift your foot from the pedal.
After you’re sewing a complete line you can make a few reverse stitches in the end to make a compact and neat seam. Reverse stitches act as a dual lock at the end of the stitches. You can remove your fabric after lifting your foot from the pedal and lifting the needlepoint. The next stitches on the fabric can then be placed again.
Conclusion
It is quite an easy task to operate a Janome sewing machine. It is all about setting up your equipment the right way and familiarizing yourself with its nuances before operating it. Once you get used to making the minor adjustments you can easily work your way up and complete other tasks like winding the bobbin etc as well.
